China Wholesale Button Sensor Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

China Wholesale Button Sensor Factories –  Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Based on domestic market and expand overseas business" is our development strategy for Cellular Interface, Cpe 5g, Qam, "Making the Products of Large Quality" is definitely the everlasting purpose of our enterprise. We make unremitting endeavours to know the target of "We Will Always Hold in Pace along with the Time".
China Wholesale Button Sensor Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink Detail:

The system block as below:

 

1

Features

♦ WiFi Solution: QCA6174A
♦ MT7620A, embedded MIPS24KEc (580 MHz) with 64 KB I-Cache and 32 KB D-Cache; 1x PCIe, 2x RGMII
♦ QCA6174A, 802.11 a/b/g/n/ac WiFi 2T2R Single Chip, provides the highest PHY rate up to 867 Mbps
♦ WiFi 2.4G and 5G are switchable (Change mode will be taken an effect after rebooting)
♦ WiFi Mode: it can be configured as STA (Default) and AP mode by SW

♦ Support Windows version: Windows XP, Explorer6 and above version of it
♦ Setting value can be backup/restore into/from file which is editable before restore to device
♦ Factory default settings are 5G 11n and STA mode
♦ Support Setup-wizard

♦ Support FW remote upgrade
♦ Memory: DDR2 64MB, SPI Flash 8MB

♦ GPHY: REALTEK RTL8211E, 10/100/1000M Ethernet Transceiver
♦ LAN: Gigabit Ethernet interface (RJ45) x1
♦ Chip Antenna: x2, On-board, SMD Type; Peak Gain: 3dBi (2.4GHz)/3.3dBi (5GHz), Dual band
♦ Power Input Range: 5 to 24 VDC
♦ Super Small Package

Technical Parameters

Connectivity I/O Port
1. RJ45 LAN Port10/100/1000 Base-T(X)RJ45, w/shielding, w/o transformer, w/o LEDs, Right Angle, DIP
2. Power Connector Connected to Power Adapter (Voltage 24V); PA Pin Header, 1×2, 2.0mm, Right Angle, DIP
3. DC JACK Connected to USB interface cable;DC Jack, DC 30V/0.5A, ID=1.6mm, OD=4.5mm, Right Angle, DIP
4. INIT Connector Pin definition and function, please refer to the followingWafer Header, 1×2, 1.5mm, Straight Angle, DIP
5. DIP Switch Pin definition and function, please refer to the followingDIP Switch, 2-Position, Red, Right Angle, DIP
6. SMD LED 0603 WLAN LED: GreenLAN LED: Orange for GE (Giga Ethernet); Green for FE (Fast Ethernet)PWR LED: Green

DHCP Error LED: Red

Wireless (2.4G, 5G switchable)
Standard 802.11 b/g/n, 2T2R802.11 a/n/ac, 2T2R
Freq. Mode Switchable (Change mode will be taken an effect after rebooting)
Channel KR standard, it should support CN, US WiFi channel by FW update later
Antenna Chip-antenna x 2 MIMO
Roaming 10ms fast roaming (only support between same frequency)
Mode STA, AP switchableDefault is STA mode
WiFi 2.4G
Channel, 13Ch. Ch. 1~13, 2402~2482MHz
Standard 802.11 b/g/n
Performance 2T2R, PHY rate up to 300 Mbps
TX Power >15dBm @HT20 MCS7 @ Antenna Port
RX sensitivity -68dBm@20MHz, MCS7; -66dBm@40MHz, MCS7
Security WEP WPA WPA2
WiFi 5G
Channel, 19Ch. Ch. 36,40,44,48                  5170~5250MHzCh. 52,56,60,64                  5250~5330MHzCh. 100,104,108,112,116,120,124  5490~5630MHz

Ch. 149,153,157,161              5735~5815MHz

Standard 802.11 a/n/ac
Performance 2T2R, PHY rate up to 867 Mbps
TX Power >14dBm @HT80 MCS9 @ Antenna Port
RX sensitivity -74dBm@20MHz, MCS7; -71dBm@40MHz, MCS7; -61dBm@80MHz, MCS9
Security WEP WPA WPA2
Mechanical
Dimensions  89.2mm (W) x 60mm (L) x 21mm (H)
Weight TBD
Environmental
Power Input 24V/0.25A
Power Consumption 6W (Max.)
Operating Temperature 0 to 40 °C
Operating Humidity 10~90% (Non Condensing)
Storage Temperature -40 to 85 °C
MTBF TBD, which is based on the materials used by design and DUT, operates condition.

About the WiFi Speed

The link speed shown for the transmission rate in this produce specification, and elsewhere is the theoretical maximum value based on the wireless LAN standard and does not represent the actual data transfer rate.


Product detail pictures:

China Wholesale Button Sensor Factories –  Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink detail pictures


Related Product Guide:

Our aim is usually to give superior quality items at aggressive rates, and top-notch company to clients around the earth. We have been ISO9001, CE, and GS certified and strictly adhere to their good quality specifications for China Wholesale Button Sensor Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink, The product will supply to all over the world, such as: Swiss, Denver, Porto, Now we have a excellent team supplying specialist service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We have been sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy with you. We also warmly welcome customers to visit our company and purchase our solutions.
  • With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Karen from Amsterdam - 2017.01.11 17:15
    In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
    5 Stars By Marcie Green from Palestine - 2017.12.09 14:01

    Related Products