Cable One Modem Factory – ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
Cable One Modem Factory – ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink Detail:
Product Detail
The MoreLink’s HS132E is a DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience. The integrated IEEE802.11n 2×2 Wi-Fi access point significantly improves customer experience extending range and coverage with high speed.
The HS132E provides you advanced multimedia services with data rates up to 400 Mbps download and 108 Mbps upload depending on your Cable Internet provider service. That makes Internet applications far more realistic, faster, and efficient than ever before.
Product Features
➢ DOCSIS / EuroDOCSIS 3.0 compliant
➢ 8 downstream x 4 upstream bonded channels
➢ Support Full Band Capture
➢ One 10/100 Mbps Ethernet for RJ45
➢ Two 10/100 Mbps Ethernet Signals for STB
➢ RF Loop Through to STB by SMB
➢ Software upgrade by HFC network
➢ Support SNMP V1/V2/V3
➢ Support baseline privacy encryption (BPI/BPI+)
Application
➢ DVB-C or Hybrid STB embedded CM
Technical Parameters
|
Protocol Support |
||
| DOCSIS/EuroDOCSIS 1.1/2.0/3.0 SNMP V1/2/3 TR069 |
||
|
Connectivity |
||
| RF | 75 OHM Female F Connector; One Loop Through by use of SMB connector | |
| RJ45 | One 10/100Mbps Base-TX Ethernet port (RJ45) with LEDs | |
| Signal Interface 1 | 2.0mm 2×18 Pin Header; The signals including: Two 10/100Mbps Ethernet, USB, +12V and GND. Pin Definitions see Table-#1 | |
| Signal Interface 2 | LEDs Signal to Front Panel | |
|
RF Downstream |
||
| Frequency (Edge to Edge) | 88~1002 MHz (DOCSIS) 108~1002MHz (EuroDOCSIS) |
|
| Channel Bandwidth | 6MHz (DOCSIS) 8MHz (EuroDOCSIS) 6/8MHz (Auto Detection, Hybrid Mode) |
|
| Modulation | 64QAM, 256QAM | |
| PHY Rate | Up to 400Mbps | |
| Signal Level | Docsis: -15 to +15dBmV Euro Docsis: -17 to +13dBmV (64QAM); -13 to +17dBmV (256QAM) |
|
|
RF Upstream |
||
| Frequency Range (Edge to Edge) | 5~42MHz (DOCSIS) 5~65MHz (EuroDOCSIS) 5~85MHz (Optional) |
|
| Modulation | TDMA: QPSK,8QAM,16QAM,32QAM,64QAM S-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM |
|
| PHY Rate | Up to 108Mbps by 4 Channel Bonding | |
| RF Output Level | TDMA (32/64 QAM): +17 ~ +57dBmV TDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV |
|
|
RF Loop Through (SMB) |
||
| Frequency (Edge to Edge) | 88 ~ 1002 MHz | |
| Loop Through Gain | >6 dB | |
|
WiFi (2.4G 2×2 11n) |
||
| Standard | IEEE 802.11n | |
| Chipset | MT7628NN | |
| MEMORY | 64MB SDRAM | |
| Flash | 16MB SPI Flash | |
| PHY Rate | Max 300Mbps | |
| Modulation Method | BPSK / QPSK / 16-QAM / 64-QAM | |
| Frequency Band | 2.4 ~ 2.4835 GHz ISM Band | |
| Spread Spectrum | IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n: OFDM (Orthogonal Frequency Division Multiplexing) |
|
| RF Output Power | ANT0/1: 2.4GHz >= 15dBm@11n; >= 16dBm@11g; < 20dBm@11b | |
| AP / STA Firmware | Linux 2.6.36 SDK | |
| Operation Mode | Green AP/STA | |
| Receiver Sensitivity | ANT0/1: 11Mbps -86dBm@8%; 54Mbps -73dBm@10%; 130Mbps -69dBm@10% | |
| Security | WEP,WPA, WPA2 | |
| Antenna | 2xIpex connector | |
|
Networking |
||
| Network protocol | IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 and L3) | |
| Routing | DNS / DHCP server / RIP I and II | |
| Internet Sharing | NAT / NAPT / DHCP server / DNS | |
| SNMP version | SNMP v1/v2/v3 | |
| DHCP server | Built-in DHCP server to distribute IP address to CPE by CM’s Ethernet port | |
| DCHP client | CM automatically gets IP and DNS server address from MSO DHCP server | |
|
Mechanical |
||
| Dimensions (TBD) | 133mm x 99mm x 20mm (Including Heatsink) | |
| WPS Button | WPS Button | |
|
Environmental |
||
| Power Input | 12V/1A | |
| Power Consumption | 12W (Max.) | |
| Operating Temperature | 0 to 40 oC | |
| Operating Humidity | 10~90% (Non Condensing) | |
| Storage Temperature | -40 to 85 oC | |
Interface Pin Definition and Mechanical Characteristic
F Connector:
RF Loop Throughput: SMB, 75 OHM, Straight Angle, DIP
RJ45, w/Shielding, w/LED, w/o Transformer, Yellow, Right Angle, DIP
Signal Interface 1: Pin Header, 2×18, 2.0mm, K31, K32, Straight Angle, SMD
|
Table #1: Signal Interface 1 |
|||
|
Pin1 |
RX1+ |
Pin19 |
GROUND |
|
Pin2 |
RX1- |
Pin20 |
USB_DP |
|
Pin3 |
TX1+ |
Pin21 |
NC |
|
Pin4 |
TX1- |
Pin22 |
NC |
|
Pin5 |
RX2+ |
Pin23 |
NC |
|
Pin6 |
RX2- |
Pin24 |
NC |
|
Pin7 |
TX2+ |
Pin25 |
NC |
|
Pin8 |
TX2- |
Pin26 |
NC |
|
Pin9 |
NC |
Pin27 |
NC |
|
Pin10 |
NC |
Pin28 |
NC |
|
Pin11 |
NC |
Pin29 |
NC |
|
Pin12 |
NC |
Pin30 |
NC |
|
Pin13 |
NC |
Pin31 |
K |
|
Pin14 |
GROUND |
Pin32 |
K |
|
Pin15 |
GROUND |
Pin33 |
+12V |
|
Pin16 |
USB_DM |
Pin34 |
+12V |
|
Pin17 |
GROUND |
Pin35 |
GND |
|
Pin18 |
USB_DM |
Pin36 |
GND |
Note: NC-No Connect; K-No Pin
Signal Interface 2: Wafer Header, 1×6, 2.54mm, w/Latch, Straight Angle, DIP
| Table #2: Signal Interface 2 | |
|
Pin1 |
GROUND |
|
Pin2 |
WIFI_LED_N |
|
Pin3 |
DOCSIS_DS_LED_N |
|
Pin4 |
DOCSIS_US_LED_N |
|
Pin5 |
DOCSIS_ONLINE_LED_N |
|
Pin6 |
CM_ACTIVITY_LED_N |
Reset Button: TACT Switch, 4P, Right Angle, DIP
Press and hold this Reset Button for about 1 ~ 3 seconds, this will enable WiFi WPS function.
Press and hold this Reset Button for at least 10 seconds, then Reset WiFi to Factory Default Settings.
PCBA, Mechanical Characteristic
TOP
BOTTOM
Product detail pictures:
Related Product Guide:
To meet the customers' over-expected pleasure , we have now our solid crew to supply our greatest all round assistance which includes marketing, sales, planning, production, top quality controlling, packing, warehousing and logistics for Cable One Modem Factory – ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink, The product will supply to all over the world, such as: Italy, Montpellier, India, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Linda from Macedonia - 2017.09.22 11:32
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By April from Montreal - 2017.03.08 14:45
